1750 Series
Deep Inreach Groove Diameter Gages

• Standard models available with 8", 12", 16" and 20" inreach for hard to reach groove and recess diameters
• 1.400" to 6.400" inside diameter range with interchangeable lower measuring tips. Tips for larger diameters available. Mode 1750-8" inreach can be modified to enter 1" entry bore diameter
• Full 5/8" retraction of upper measuring tip-will check groove recess diameters up to 5/8" larger than entry bore diameter. Greater retraction available for deeper grooves as optional extra
• Modified measuring tips readily available for applications not covered by standard range
• Two point contact standard. Three point contact available
• Supplied with AGD group 1 .0005" dial indicator with 1/8" travel - .01mm dial indicator with 2.5 mm travel optional.
• Finished hardwood storage cases available for all models

Contact for more information.