SUPERMINI

Carbide Inserts for small diameter bores starting from 0.3 mm (.012")

• All inserts offer coolant thru
• Patented holding systems allows repeatability and accurate indexing of insert
• Secure and stable clamping system

Carbide inserts for bore diameters starting from 8 mm (.315").

• Simple insert indexing through front mounted insert screw
• Universal holder for both left and right handed inserts
• Vibration resistant carbide shank
• Coolant thru holders
• Bore depth up to 80 mm (3.150")

• Insert width from 0.5 mm (.020")
• Holders available with screw clamp or self clamp systems
• Different geometries available based on workpiece material.

• Insert widths available in 10 (.394:), 12 (.472"), 14 (.551"), 16 (.629"), 18 (.708"), 20 (.787"), 26 (1.02"), 32 (1.259") and 45mm (1.771").
• Form depth up to 10mm (.394").
• Square shank and dovetail design holders available

System 105:

• From outer groove Ø 5 mm (.197")
• Groove depth up to 6 mm (.236")

System A110:

• From outer groove Ø 20 mm (.787")
• Groove depth up to 30 mm (1.181")

System 114:

• From outer groove Ø 12 mm (.472")
• Groove depth up to 6 mm (.236")

System K220:

• From outer groove Ø 38 mm (1.496")
• Groove depth up to 25 mm (.984")

System 360:

• From outer grrove Ø 20 mm (.787")
• Groove depth up to 3 mm (.118")

System 221:

• From outer grrove Ø 40 mm (1.575")
• Groove depth up to 8 mm (.215")

External and Internal

• Groove and turn
• Face grooving / Trepan
• Threading
• Cut off / Part off
• Form grooves
  • Corner undercut
  • Thread relief to DIN 76
  • Profiling
  • Groove and chamfer to DIN 472/471
  • Poly-Vee "J" profile

External and Internal

• Precision-sintered and precision-ground geometries
• Grades available for all materials
• Depth of cut to 25 mm (.984") for grooving and turning
• Internal, external and face grooving
• Profiling of deep grooves
• Geometries provide chip control
• Superior groove wall finish through chip formation
• Feed-Rates up to 0.6 mm/Rev (.024"/Rev)

• Starting from minor diameter 4.0 mm (.157")
• Available profiles:
  • Metric ISO thread pitch from 0.5 mm
  • Metric ISO Buttress thread (DIN 103)
  • Whitworth pipe thread (DIN ISO 228, 229 and 2999)
  • BSW/BSF
  • UN
  • NPT
  • Acme/Stub Acme
  • No shims required. All Horn thread inserts are ground with proper helix clearance
• Special profiles on request

THREADING